Zen White Full Body Vitrified Tile Code39966

Zen White has a clean, largely uniform white surface and a glossy, light-reflective finish. Its restrained design creates a simple background for different interior schemes. Product photography, screen settings, room lighting, and the delivered batch may influence how the color appears, so check the tiles together before installation and plan the layout accordingly.

Yes. Zen White is listed in the Full Body Vitrified Tile category. This classification describes the stated product construction but does not independently confirm strength, abrasion resistance, slip performance, or suitability for every installation. Review the available technical specifications for the intended area, particularly where heavy traffic, moisture, impact, or demanding maintenance conditions may be expected.

Zen White is specified for floor and wall applications. It may suit selected living areas, bedrooms, passages, feature walls, and other indoor surfaces where its technical specifications match the intended use. Final selection should consider traffic, substrate condition, moisture exposure, cleaning requirements, installation system, movement joints, and any applicable project or local requirements.

Yes. Zen White is listed for floor use, but its glossy finish does not automatically make it appropriate for every walking surface. Confirm available slip and wear information for the intended location, especially where water, outdoor exposure, heavy traffic, or barefoot use is expected. Glossy floor tiles may also make dust, footprints, and surface marks more noticeable.

It may suit selected bathroom walls or floors when the available product ratings and complete installation system are appropriate for the location. A glossy surface may become slippery when wet, and vitrified tiles do not replace waterproofing. Confirm slip information, substrate preparation, slope, drainage, waterproofing, adhesive, grout, movement joints, and local installation requirements before selection.

Each Zen White tile has a nominal size of 600x1200mm and a listed thickness of 9mm. One tile covers 0.72 sq m before joint allowances, while the 2-piece package provides approximately 1.44 sq m. Order extra for cuts, breakage, layout planning, batch matching, future repairs, and site conditions, then confirm actual measurements and the installer’s wastage allowance.

Clean Zen White with a soft cloth or non-abrasive pad and a mild cleaner suitable for glossy vitrified tile surfaces. Remove spills and residues promptly, rinse as directed, and avoid abrasive powders, harsh acids, metal pads, or unverified chemicals that may affect the finish. Test new cleaners in an inconspicuous area and follow the manufacturer’s care guidance.