Light Grey Rustic Tile Code40438

This rustic tile is manufactured from vitrified material and is described as light grey. Its detailed pattern, tonal variation, and surface character should be confirmed from a current physical sample before ordering. Installation products, substrate preparation, adhesive, grout, and fixing methods should follow the manufacturer’s technical guidance for the product’s confirmed application and documented surface requirements.

The intended application rating was not provided with the product information. Before ordering, confirm whether Code40438 is approved for floor use, wall use, or both. Also verify its suitability for expected traffic, moisture exposure, substrate conditions, and location. Bathrooms, outdoor areas, and demanding commercial installations require specific technical information rather than assumptions based on vitrified material or rustic categorisation.

The official finish was not supplied, so confirm whether the tile is matt, glossy, textured, or another documented finish before ordering. Finish terminology and visual appearance do not independently establish slip resistance or wet-area safety. If Code40438 is approved for floor use, verify its slip-resistance information before considering bathrooms, kitchens, entrances, balconies, or other moisture-prone areas.

The tile presents a light-grey color intended to create a restrained neutral base across its large rectangular format. Its exact shade, markings, tonal movement, and surface character should be reviewed using a current physical sample. Lighting, viewing angle, screen settings, surrounding finishes, grout color, and production variation may influence how the tile appears individually and across a completed installation.

The tile measures 600x1200mm. Pack quantity and official pack coverage were not included in the supplied information, so confirm both before calculating requirements or placing an order. Measure the complete installation area and include additional material for corners, openings, perimeter trimming, layout adjustments, accidental breakage, batch consistency, and spare pieces that may be required for future repairs.

Dry-lay several tiles before fixing them to assess shade consistency, orientation, pattern distribution, joint width, and cut positions. Use an adhesive suitable for vitrified tiles, the prepared substrate, and the confirmed application. A qualified installer should plan alignment, transitions, perimeter cuts, movement joints, grout selection, and complete installation coverage according to the manufacturer’s technical guidance.

Remove loose dust using a soft cloth, brush, or suitable vacuum, then clean the tile with water or a pH-neutral product recommended for vitrified surfaces. Because the official finish was not supplied, obtain the manufacturer’s maintenance guidance before using specialised cleaners. Avoid abrasive pads, harsh acids, sharp tools, and untested chemicals, and test unfamiliar products on a concealed section.