White Black Carpet Tile Code40480C

This carpet tile is manufactured from vitrified material and has a matt finish. It is a hard-surface decorative tile rather than a soft textile or modular fabric carpet. Its pattern consists of four large white rounded panels divided by a contrasting black cross-shaped field. Installation products and substrate preparation should follow the manufacturer’s technical guidance for the intended floor or wall application.

This tile is designed as the primary field component within a coordinated carpet-style or framed layout. Its four rounded white panels repeat across the central area, while compatible border and corner pieces can define the perimeter. Before ordering, compare the dimensions, colors, edge positions, and pattern direction of every component to confirm that they create the intended complete arrangement.

The product is specified for both floor and wall applications. It can be considered for suitable entrance features, living-area floor accents, reception zones, retail displays, selected hospitality interiors, and decorative wall panels. Confirm the technical rating for expected traffic and conditions. Wet floors, outdoor areas, and demanding commercial applications require separately documented suitability before installation.

The matt finish limits strong reflections and keeps the black-and-white geometric pattern clearly defined. However, matt alone does not establish slip resistance or wet-floor safety. Before using the tile in bathrooms, entrances, kitchens, or moisture-prone areas, verify its documented slip-resistance rating and ensure appropriate substrate preparation, waterproofing where required, drainage, slope, grout selection, and professional installation.

Each tile measures 300x300mm, and one pack contains eight pieces. This provides approximately 0.72 square metres of nominal coverage before cuts and wastage. Since the product functions as a patterned field component, calculate quantities from the field dimensions and complete modular layout. Include additional pieces for cuts, breakage, batch consistency, alignment adjustments, and possible future replacement requirements.

Dry-lay the complete arrangement before permanent fixing. Position the feature tiles first, then add the intended border and corner components around the field according to the approved layout. A qualified installer should check orientation, joint width, transitions, perimeter cuts, and movement joints so the rounded panels, black divisions, tile edges, grout lines, and adjoining patterned sections connect accurately.

Remove loose dust using a soft cloth, brush, or suitable vacuum, then clean the tile with water or a pH-neutral cleaner intended for vitrified surfaces. Avoid abrasive pads, harsh acids, sharp tools, and untested chemicals that could mark the matt finish. Clean spills promptly and test unfamiliar products on a concealed section before applying them throughout the complete installation.