Dark Grey Flagstone Elevation Tile Code40869

Dark Grey Flagstone combines irregular angular sections in charcoal, graphite, slate grey, and softer ash tones. Lighter joint-like lines define the separate shapes, while mottled markings create a weathered stone impression. Its matt finish limits glare. Because screens and production batches may vary, review a physical sample when exact color, relief, or pattern balance is important.

No. Dark Grey Flagstone is a ceramic tile with a decorative surface designed to resemble irregular pieces of flagstone. It is not quarried stone, and the visible sections are not installed separately. This difference affects expectations for thickness, variation, joints, sealing, and maintenance, so inspect a sample and follow the tile and fixing-material manufacturers’ installation instructions.

No. Dark Grey Flagstone is specified for wall use only and must not be installed as flooring. Its matt finish and stone-like appearance do not establish suitability for foot traffic, floor loads, impact, or slip resistance. Choose a separately documented floor-rated tile for walking surfaces, steps, and landings, even when a coordinated dark flagstone design is required.

Dark Grey Flagstone can be considered for indoor feature walls, entrance accents, living-room panels, dining spaces, reception walls, and selected commercial interiors. Confirm suitability in places exposed to frequent splashes, heat, staining, or impact, and use compatible fixing products. Since it is wall only, the tile must not continue onto floors, steps, landings, or other walking surfaces.

The ceramic material and flagstone appearance do not independently establish exterior suitability. Before outdoor installation, confirm that Dark Grey Flagstone has a documented rating for local weather, moisture, temperature movement, and freeze-thaw exposure where applicable. The installer should also determine the appropriate substrate, waterproofing, adhesive, grout, movement joints, edge protection, installation height, and ongoing maintenance requirements.

Each Dark Grey Flagstone tile measures 300x600mm, providing a nominal face area of 0.18 sq m. Four tiles are supplied per pack, giving approximately 0.72 sq m of nominal coverage before waste. Measure the finished wall and allow extra material for cuts, breakage, layout adjustments, edge detailing, pattern alignment, and future repairs when calculating the required pack quantity.

Remove loose dust with a soft brush or dry cloth, then clean Dark Grey Flagstone using water and a mild, tile-compatible cleaner. Avoid abrasive pads, aggressive chemicals, and tools that may mark the matt surface or grout. Rinse away cleaner residue and inspect joints, sealant, and exposed edges periodically, particularly in splash-prone locations or approved exterior installations.