Grey Rustic Tile Code40358

This rustic tile is made from glazed vitrified material and has a matt finish. Its listed color is Davy Grey, while the exact grain, relief, tonal movement, and surface variation were not provided. Inspect a current sample and technical sheet before ordering. Installation materials and substrate preparation should follow the manufacturer’s guidance for the intended floor or wall application.

The tile is specified for both floor and wall applications. It can be considered for suitable living rooms, bedrooms, dining areas, passages, feature walls, reception zones, and selected commercial interiors. Confirm the product’s documented rating for expected traffic, moisture exposure, substrate conditions, exterior use, and maintenance requirements before selecting it for any specific residential or commercial location.

No. A matt finish and rustic category do not independently establish slip resistance or wet-floor safety. Before using code40358 in bathrooms, kitchens, entrances, balconies, or other moisture-prone areas, verify documented slip-resistance information and application approval. Appropriate waterproofing, drainage, slope, substrate preparation, adhesive, grout, movement joints, and professional installation may also be required for the complete system.

The tile is listed in a Davy Grey color with a matt finish and 600x1200mm rectangular format. The exact undertone, grain, texture, relief, and tonal variation were not supplied. Lighting, viewing angle, grout color, surrounding finishes, screen settings, and production variation can influence the appearance, so inspect a current physical sample under the intended lighting before ordering.

The tile measures 600x1200mm. Pack quantity and official pack coverage were not provided, so confirm these details before calculating requirements or placing an order. Measure the complete floor or wall area and include additional material for corners, openings, perimeter cuts, layout alignment, accidental breakage, batch consistency, and spare pieces that may be useful for future repairs or replacements.

Dry-lay several tiles before fixing them to review shade distribution, surface variation, direction, joint width, and cut positions. Use an adhesive suitable for glazed vitrified tiles, the prepared substrate, and the specified application. A qualified installer should plan the starting point, edge alignment, perimeter cuts, transitions, movement joints, grout selection, and installation coverage according to manufacturer guidance.

Remove loose dust using a soft cloth, brush, or suitable vacuum, then clean the tile with water or a pH-neutral product recommended for glazed vitrified surfaces. Avoid abrasive pads, harsh acids, sharp tools, and untested chemicals that may mark the matt finish. Wipe spills promptly and test unfamiliar cleaners on a concealed section before wider use.