Grey Full Body Vitrified Tile Code39962

This tile is listed as a full-body vitrified product with a matt surface and a stated 15mm thickness. Its nickel-grey design has a fine, cement-like texture suited to understated floor and wall schemes. Full-body classification and thickness should still be reviewed alongside the manufacturer’s technical data, including load, traffic, water absorption, and application ratings, before final specification and installation planning.

The 15mm thickness is a key physical specification that must be included in layout and installation planning. It can influence finished floor height, transitions to adjoining materials, door clearance, adhesive selection, cutting equipment, handling, and substrate requirements. Thickness alone does not confirm higher load capacity, outdoor use, or commercial suitability; those decisions require the relevant manufacturer test data and project requirements.

Specified for floor and wall applications, this tile can be considered for living rooms, kitchens, corridors, offices, shops, commercial interiors, and feature walls. For bathrooms, entrances, balconies, exterior areas, or heavily used floors, confirm slip-resistance, wet-area, exterior-use, and traffic classifications. The 15mm thickness must also be coordinated with levels, thresholds, and adjoining finishes throughout the installation and service life.

Each tile measures 600x600mm and has a stated 15mm thickness. A pack contains two pieces, giving approximately 0.72 square metres of nominal coverage before cutting and wastage. Calculate the order from verified site dimensions, then include an allowance for layout, edge cuts, breakage, batch consistency, and spare tiles required for potential future repairs after installation is completed.

The surface has a neutral nickel-grey tone with fine tonal speckling that creates a restrained cement-inspired appearance. Its matt finish limits strong reflections and keeps the pattern visually even across larger areas. Lighting, grout color, nearby materials, screen settings, and batch variation may change how the grey appears, so examine a current physical sample under the intended lighting before placing the order.

Professional installation is recommended because the 15mm thickness affects handling, cutting, adhesive-bed planning, finished levels, and transitions. The substrate should be clean, dry, stable, level, and prepared for the intended load. A qualified installer must select the adhesive, trowel size, back-buttering method, joint width, movement joints, and cutting equipment according to manufacturer guidance and site conditions before work begins.

Sweep or vacuum away loose particles before cleaning with water and a pH-neutral tile cleaner. Avoid harsh acids, abrasive pads, waxy coatings, and untested chemicals that could alter the matt surface or grout. Wipe spills promptly and follow the cleaner manufacturer’s instructions. Test new products on a concealed area before treating the entire installation during regular maintenance and everyday use.